
Safety switch installation in Perth

A safety switch cuts the power in a fraction of a second when current leaks where it shouldn't, like through a person. We install, test and repair RCDs across Perth, and get homes compliant for sale or rent.
What a safety switch actually does
A safety switch, or residual current device (RCD), watches the current going out on a circuit and the current coming back. If the two don't match, some of that electricity is going somewhere it shouldn't, often through a person to earth. A household RCD trips at 30 milliamps of leakage and cuts the power in a fraction of a second, fast enough to stop most shocks becoming fatal.
A circuit breaker is different. It protects the wiring from overloads and short circuits, but it won't react to the small leakage currents that hurt people. You need both, and a lot of older Perth homes only have one.

RCD requirements for selling or renting in WA
WA has had clear rules on this for years:
If you're selling, the RCDs need to be in before settlement. If you rent the property out, they must be in place. Settlement agents and property managers check, and it's one of the most common last-minute calls we get. We can usually add RCDs to a board that's in good nick. If the board's too old or too full, a switchboard upgrade is often the better fix. While we're there, it's worth checking your smoke alarms too, as they fall under the same sale and rental rules.
Safety switch keeps tripping?
An RCD that trips is usually doing its job. The trick is finding out what it's reacting to. Common causes we find in Perth homes:
A faulty appliance
Kettles, toasters, washing machines, old fridges and pool pumps are regular offenders.
Water where it shouldn't be
Outdoor power points after rain, leaking roofs dripping onto light fittings, reticulation spraying a garden outlet.
Damaged cable
Rodents in the roof space and nails through walls both cause intermittent trips that are hard to pin down.
A worn-out RCD
They don't last forever. An old unit can start tripping for no good reason, or worse, stop tripping when it should.
Try this first: switch off and unplug everything on the affected circuit, reset the RCD, then plug things back in one at a time. If it trips when one appliance goes in, you've found it. If it trips with nothing plugged in, or won't reset at all, the fault is in the wiring and you need an electrician. If you've lost power to the fridge or medical equipment after hours, call our emergency electricians.
RCD testing
Every RCD has a test button. Push it every three months or so: the switch should snap off straight away. If it doesn't, it's not protecting you.
The button only tells you part of the story. We test RCDs with proper equipment to check they trip within the required time at the right current, which is what matters in an actual fault. We do this for homeowners, landlords between tenancies, and property managers looking after multiple rentals.
How we install safety switches
We look at how many circuits you have, what's already protected and whether the board can take new RCDs.
You get a price before we touch anything, and a clear answer on whether you need RCDs added or a new board.
RCDs fitted, every circuit tested, and every breaker labelled.
You get an Electrical Safety Certificate for the work, which is also what your settlement agent or property manager will want to see.
Why Perth landlords and sellers use Dent
What Perth customers say
Real reviews from real jobs.
Safety switch FAQs
RCD stands for residual current device, the technical name for a safety switch. It compares the current flowing out on a circuit with the current coming back, and cuts the power in a fraction of a second if some of it is leaking to earth. That leak is exactly what happens when someone gets a shock.
At least two, covering all power point and lighting circuits, for an existing home being sold or rented. New homes need RCD protection on every circuit.
Switch off or unplug everything on the circuit that tripped, then flick the safety switch back up. If it stays on, plug things back in one at a time to find the culprit. If it trips again straight away with nothing connected, leave it off and call an electrician.
Water is getting into something: an outdoor power point, an external light, a garden pump or a cable joint. Once it dries out the switch will often reset, but the problem is still there. Get it found and fixed before the next downpour.
A check, with proper test equipment, that each safety switch trips fast enough at the right leakage current. Pressing the test button yourself every three months or so is worth doing, but it only proves the switch mechanism moves. Landlords should have RCDs tested between tenancies, and older units in particular can become unreliable.
Yes. Any home rented out in WA must have at least two RCDs protecting all power point and lighting circuits. If yours doesn't, we can usually fit them in a single visit.
$50 off all online enquiries
Hurry, November only. Send us your job through the website and save $50.
Applies to jobs enquired about through this website during November.

Tell us about the job
We reply during business hours, Monday to Friday 7am to 5pm and Saturday 7am to 3:30pm. For small jobs we can often price it from your photos, no visit needed.
Urgent? Don't wait for a reply. Call us now.
CALL 0468 003 432Book an RCD check
Tell us about the job. For small jobs we can often price it from your photos, no visit needed.
Fixed quotes from licensed electricians. Replies during business hours, Mon–Fri 7–5 and Sat 7–3:30.